Service
UV Electroplating Process

UV electroplating:

The UV electroplating process for glass bottles is a coating formed by applying a special coating on the surface of the glass bottle and then curing it with a UV curing machine. Firstly, the surface of the glass bottle is cleaned to remove impurities such as oil and dust; Secondly, a special spraying machine is used for pre-treatment, and the pre coating agent is evenly sprayed on the surface of the glass bottle to enhance the adhesion of the coating; Next, a UV coating spraying machine is used to spray the specially made UV coating onto the surface of the pre treated glass bottle, forming a uniform thin film; Then, using a coating machine, roll the coating into a certain thickness and clean the surface of the glass bottle with distilled water during the scraping process to prevent defects such as bubbles and pits from appearing on the final surface; Finally, use a UV curing machine to quickly and forcibly cure the coating, enabling it to form a stable coating on the surface of the bottle.


1.jpg2.jpg3.jpg26.jpg
7.jpg8.jpg13.jpg27.jpg




14.jpg15.jpg16.jpg17.jpg
9.jpg19.jpg22.jpg6.jpg
21.jpg20.jpg10.jpg12.jpg
33.jpg31.jpg34.jpg30.jpg


Mobile +86-18769799055 Mobile admin@cn-boli.cn Back Top